Wyse R90LE Especificaciones descargar pdf (Pagina 13)

Installing R90LE Thin Client Flash 9

Step 2: Install the R90LE Flash Module

Warning

Flash modules may be susceptible to damage by Electro-Static Discharge

(ESD). All industry-standard cautions should be followed to avoid ESD.

Before you remove or install a module, touch any metal part of the chassis

and keep that contact with the chassis during the installation process.

1. To have easy access to the flash module, the PCI-e riser card must be removed first.

Using the finger tab, pull the card out of its connector and set aside.

Figure 7 Removing the PCI-e riser card

2. Note where the connector of the flash module is located in Figure 8. Use needle-nose

pliers to squeeze the plastic standoff lock as you rock the flash module back and forth

to remove it from the socket.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 21 22

Sin comentarios

Wyse R90LE Especificaciones Pagina 13